INSTALLING TECHNICAL STRIPINGS AND HOW TO

Terlatih.me Regarding installing striping on a motorbike, it is better if before doing it yourself, it would be better to know or understand the techniques and methods, we already know and understand that later when installing a striping is easier, easier, faster, and doesn't take much time besides that too to avoid failure in the process of installing striping on the motorcycle. It is necessary to know that sometimes we see or encounter some people who experience failure in the process of attaching a striping, and if a failure occurs like this it will waste the striping, it cannot be reused, also wasting money and time of course. And to avoid this incident do not happen to us when installing striping on the following motorbikes for techniques and ways including: 

 When installing striping on a motorcycle, to avoid unwanted things such as difficulty installing, taking a long time and even failure to install the striping, that's why it's best to find out, understand, and know for techniques and how to install striping that is easy and fast. Regarding the technique of installing striping on a motorcycle, the method is not much different from the technique of attaching a scoter sticker to a striping with the material or characteristics found on it, which tends to be easier and faster. And to find out the following information from us, as a first step is to prepare the tools and materials that will be used, including: 

When installing striping on a motorcycle, you must provide the tools and materials used, including:

 A. Striping motor. 

 B. Scrap. 

 C. Cutter. 

 D. Gas is lighter or hands prayer. 

 E. Water. 

 F. Chamois. 

 G. Sanpoly or eucalyptus oil.

 If all the tools and materials are available the next is a technical process and an easy way to install striping on the motor, namely:

 A. Wash the body with water and dry it with a chamois until it is completely clean of dust and dirt. 

 B. Opening the back cover paper striping the edges, attaching to the body in sequence while flattening the middle side from the front to the back with fingers or thumbs. 

After that, just move to the middle or edge of either the top or bottom of the striping while flattening and stroking it using a screw, if there is a part of the striping that is folded, heat it using a gaslighter, do the technique like over and over until it's finished. 

 C. Clean the striping with simply or eucalyptus oil. 

 When you have finished installing the striping for the finishing step or the last step is to clean the striping that has been installed using simply or eucalyptus oil. In general, there is dirt in the form of glue from the striping and can only be cleaned or can be cleaned with simply and eucalyptus oil. 

 Friends of all that we can inform at our current meeting, hopefully, it can be useful and useful in increasing knowledge and insight for all. That is all and thank you.

ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro ilmucoro